Garage Door Remote Control, 4-Button (433 MHz)

  • Garage Door Remote Control, 4-Button  (433 MHz)
  • Garage Door Remote Control, 4-Button  (433 MHz)
  • Garage Door Remote Control, 4-Button  (433 MHz)
  • Garage Door Remote Control, 4-Button  (433 MHz)
  • Garage Door Remote Control, 4-Button  (433 MHz)
  • Garage Door Remote Control, 4-Button  (433 MHz)
  • Garage Door Remote Control, 4-Button  (433 MHz)
  • Garage Door Remote Control, 4-Button  (433 MHz)
  • Garage Door Remote Control, 4-Button  (433 MHz)
Location
Maardu, Harjumaa, Estonia
Description

Garage Door Remote Control, 4-Button (433 MHz)
Universal 4-button remote control for garage doors, barriers, and fixed-code automation systems. Suitable for replacing the original remote control, subject to compatibility requirements.
⚠️ IMPORTANT:
❌ This remote does NOT support rolling code.
If you are unsure of compatibility, do not purchase this remote.
Compatibility
The remote is compatible if:
the original remote is functional and working
its frequency is known (433 MHz)
the chip used is:
PT2262, PT2264, SC2262, SC2260, HS2262, LX2262, EV1527, PT2240, or no code
NOT compatible with HCS300 or other rolling code chips
Key Features:
Type: Universal Remote (signal copying)
Number of Buttons: 4
Operating Frequency: 433 MHz
Power: CR2032 battery
Learning: Copying from the original remote
The remote is configured by copying the signal from the original remote. 🔹 Step 1. Clearing the Remote's Memory
Press and hold buttons A + B simultaneously.
The LED will blink 3 times; release one button.
While holding the second button, press the released button 3 times.
The LED will begin to blink quickly; the memory has been cleared.
After clearing, the remote will not respond to presses; this is normal.
🔹 Step 2. Copying the Signal
Hold the original remote in one hand and the new remote in the other.
Place the remotes as close to each other as possible (ideally, side by side on a table).
Press the desired button on the original remote and simultaneously press the button on the new remote.
When the LED on the new remote blinks 3 times and begins to blink quickly, the learning is successful.
Repeat for the remaining buttons as needed. If learning fails:
Try placing the remote controls back-to-back
Avoid interference (Wi-Fi, other remote controls)
Clear the memory and repeat the process
Power
Uses a CR2032 battery
If the signal range decreases, replace the battery
Housing material: plastic
Purpose: garage doors, automatic systems, barriers
Suitable for home use and easy remote replacement without programming the control unit.
0658606756069
🛒 Buy in our e-shop: https://kruvid24.ee/en/p/garage-door-remote-control-4-button-433-mhz/

Garage door remote, 433 MHz remote, universal remote, remote control, gate automation remote, copy remote, 4-button remote, barrier remote, non-rolling code remote, fixed code remote, garage automation, gate accessories, kruvid24, solidago24

Category
Home and Garden
Subcategory
Renovation and construction
Тип объявления
Продам
Published
12 December 2025